Cable plant — «Ludinovocable»

Sales department

8 800 707-11-14

free line


Image "all0006"

XLPE insulated armoured power cables with longitudinal hermetic sealing for nominal voltage up to 1kV. The cables meet the requirements of Specs. 16.К71-277-98.


According to purpose and application ПвБбШп - N2XB2Y, АПвБбШп — NA2XB2Y (DIN VDE 0276-603).


  1. Conductor — copper or aluminium, single or multi-wire, round or sector shaped, class 1, 2 as per national standard GOST 22483-77. The number of conductors: 4, 5. 4-conductor cables feature 3 conductors of the same area and one conductor of smaller area (ground or neutral one).
  2. Insulation — XLPE. Insulated multi-conductor cables carry identification coloring. Neutral conductor insulation is blue. Grounding conductor insulation is a combination of green and yellow colors.
  3. Stranding — insulated conductors are stranded to form a core around a cord of water blocking thread.
  4. Belt Insulation — PVC plastic compound, is laid to fill interstices between conductors.
  5. Protective layer — BbShp type: a) armour of two galvanized steel tapes; b) PE protective hose.


The cables are designed for power transmission and distribution in stationary equipment for nominal voltage 1kV, nominal frequency power systems with insulated and grounded neutral.

The primary scope of application: for laying in trenches irrespective of corrosiveness of grounds and ground waters except for swelling or subsided grounds and for laying in high humidity grounds and water.

Cables can be laid in water through non-navigable reservoirs under a condition of deepen them in a ground, as well as in partially flooded cable constructions

Fire safety class - according to NPB 248-97 classification.


Type of climatization: B, allocation category 5 as per national standard GOST 15150-69.

The operating temperature range -60°С to +50°С
Continuously permissible conductor operating heating temperature no more than +90°С
Short circuit conductor max. temperature no more than +250°С
Permissible conductor operating heating temperature under overload condition, ≤ +130°С
The cables are longitudinal distribution of water resistant.
Face-to-face length for main conductor areas
  • 2.5 to 16 мм² — 450 м
  • 25 – 70 мм² — 300 м
  • 95 мм — 200 м
Cable Installation and assembly without preheating Not lower -20°С
Bending radius when laid: 7,5 outer cable diameters
Guaranty service life 5 years from the date of commissioning, but not later than 6 months from the date of manufacturing.
Service life not less than 30 years

Options and сertificates

Main Parameters (pdf, 122.45 kb)