АВБбШвнг

PVC insulated flame-retardent power cables with protective covering of БбШв type up to 1 kV. The cables meet the requirements of Specs. 3500-001-46600751-2002.

Check availability and price

Аpplication

The cables are designed for power transmission and distribution in stationary equipment for nominal alternating voltage 0,66 kV and 1kV, frequency 50Hz.

The cables are used for installing in the ground (trenches), indoor (incl. fire-dangerous), tunnels, ducts and mines (except cable blocks), as well as outdoor if there is a danger of mechanical damage while operating but if cable is not exposed to considerable stretching effects.

The cables are flame-retardent while bundled installation.

Specifications

Type of climatization UHL, T, allocation category 1 and 5 as per national standard GOST 15150-69.

Operating temperature range (relative air humidity at the temperature up to +35°С-up to 98%)	-50°С to +50°С
Continuously permissible conductor operating heating temperature	no more than +70°С
Face-to-face length for nominal cross-section area:	up to 16 мм² — not less than 450 м 25 – 70 мм² — not less than 300 м 95 мм² or greater — not less than 200 м
Cable installation and assembly without preheating	not lower -15°С
Minimal bending radius when laid:	single conductor cables — 10 outer diameters multi conductor cables — 7,5 outer diameters
Guaranty service life	5 years from the date of commissioning.
Service life	30 years

Options and сertificates

Main Parameters

(pdf, 130.20 kb)